Friday night when I went to hang my NX150 I found one of the spreader poles had the little black rod tip missing. A word of advice to all 150 and 250 owners: You may want to pop these off and put a drop or 2 of super glue in them, then re-install them. That way you don't lose the black tip. True, its not that big a deal. The strap pocket is quite substantial, and it would take quite a bit for the bare rod end to poke through it, but it is a minor annoyance to have it missing.
I initially intended to dip the rod tip in JB weld or epoxy to build up a ball on the end. After prowling around Wally World for a while, I stumbled onto their small metal racks and shelving. Hmmm.. the tip ends look quite similar, only slightly oversize. A bit of hot melt glue to fill the void and it'll hafta do.
Bookmarks