Well here is my next venture into DIY. I'm doing an underquilt. I'm shooting for something close to 0 degree F rating. I'm using 1.1 Ion for top and bottom. The dimensions are 72"x48". I'm going with 3" baffles and using a differential cut my chambers should give me close to 4" of loft. I'll have 12 chambers with 1.3 oz of 850 fill down. So far I have cut the top and bottom and laid out the lines to sew the baffles. It's kinda hard doing it with a small table but I'm getting through.
20231126_104642.jpg
Bookmarks