The only cave-at to pads... is making sure they are wide enough.
As a side sleeper I always did okay with standard pads (20")... but 25/26" models became a mandatory upgrade for me when pairing them with a bridge.
The only cave-at to pads... is making sure they are wide enough.
As a side sleeper I always did okay with standard pads (20")... but 25/26" models became a mandatory upgrade for me when pairing them with a bridge.
Sure! I have a WBRR and use a Therm-a-Rest in between the layers hand have had great luck! The Therm-a-Rest pad is not expensive and is useful if I ever needed to go to ground in a pinch.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
$30 or so
So, you can buy one, give it a shot, if it doesn't do the trick for you, you are not out much cash and have a very useful pad in your gear quiver!
Thank you. I'll give it a shot.
Has anyone used a Klymit Hammock V insulated in a gathered end hammock? Specifically at freezing and below.
Pads in a hammock........
Ridgerunner video 11:40 in.
Carry forth.
Shug
Whooooo Buddy)))) All Secure in Sector Seven
Thank you.
I have had a Klymit Insulated Static V Lite pad and used it during a summer night in my Ridgerunner hammock. The temps can't have been less than 65°F - I would say it was around 70°F. I woke up shivering at midnight. Granted, I sleep very cold, but Klymit claims an r-value of 4.4!!! I have used a Therm-a-Rest ProLite Plus pad, that "only" has an r-value of 3.4 successfully down to probably 40°F in a hammock, and I'm sure I could have taken it much lower.
As far as I could see, the "insulation" of the Klymit was a very thin (less than 1mm) layer of fuzz glued to the inside of the pad. Even if something like that could provide adequate insulation, the pad has "baffles". If it was a quilt, you would say it was "sewn through". This means, there's no insulation where chambers end. This design might work on the ground, where the air can't circulate (much) between the chambers, but unfortunately, there's a lot of air circulation under the hammock...
I definitely would NOT recommend Klymit for temperatures near freezing - unless you sleep seriously warm. I sold my pad, and I won't buy another Klymit product soon.
I am very sorry to hear about hutzelbein's unfortunate experiences. I own the Klymit Insulated Static V Ultra Light and the Klymit Insulated Hammock V with the same advertised R-value of 4.4. I have used the ground pad in a tent and the hammock pad in a gathered-end netless hammock, and I have taken both products down into the high 30s several times. FWIW I am a notoriously "average" sleeper and find most quilts and pads comfortable right to the advertised rating (but not below) wearing no more than a light full-coverage microfiber base layer. In the case of the lows with the Klymit pads I paired them with a 30F synthetic top quilt. The heat in these insulated pads is slower to generate and quicker to dissipate than when using a proper underquilt, and it feels different some how,but I did sleep in relative comfort. I would use either pad again in similar circumstances, but I am unsure of their performance all the way down to the freezing mark; you would certainly survive at 32F, but you might not be comfortable or sleep well. At temperatures above 40F, while some models like the Hammock V are overpriced, I definitely think the Klymit insulated pads are viable alternatives, and the rectangular pad would probably work in a bridge hammock if you got the inflation level right. I think the Klymit standard uninsulated pads dimply aren't worth the money. My $0.02. YYMV. HTH...
https://www.hammockforums.net/forum/...V-Sleeping-Pad
https://www.hammockforums.net/forum/...od-idea-or-not
Smart graphic design for all your needs by BGD
I would not compare any pad with an underquilt - I think it's only fair to compare pads with other pads. Before I had tried pads from different manufacturers, I assumed that the r-value is a universal way of measuring insulation. But after using an Exped SynMat 7 UL M (r-value 3.1) and the Klymit Insulated Static V Lite (r-value 4.4) I don't believe that anymore. Both the Exped as well as the Klymit had only a thin layer of synthetic fibers glued to the inner side of the top layer. Without air in the pads, they were completely flat - and as far as I could see neither had tiny chambers like the NeoAir type of pads have. I don't know how these pads are meant to insulate. I was cold with both pads way above the stated working temperatures.
With quilts I usually add 10°-20°F to the stated temperature range for my warmth needs. But for the Exped pad I was cold at 60°F when using it on the ground (!); that's 35° difference to the stated temperature! With the Klymit the difference was similar. If I had only ever used pads from those two companies, I would have assumed that I simply need an r-value of 8 or something. But I have never been cold with any Therm-a-Rest pads even below freezing, and those were rated similar. I would be very interested to hear how these companies measure their r-values. I simply don't understand, how the real world results can be so different! I have been eying pads from other manufacturers, but I'm very hesitant to go through with my order because of my experiences so far.
Bookmarks