Thanks to all the help with hardware and measurements, I set this up I think it was last weekend. I finally got around to taking some pictures. I did this all myself, with an old drill/ screw gun and a pair of Visegrip, my favorite tool.
The hardware I used was meant for trucks, I believe, and can handle 2500 pounds. Overkill, given nothing else will handle that, but it is what I found and it worked and I since I set it in the corners, I found a 4x4 or two 2x4's, so I drilled it at a angle.
Indoor Hang setup-4.jpg
Indoor Hang setup-0.jpg
Indoor Hang setup-6.jpg
Indoor Hang setup-2.jpg
Indoor Hang setup-1.jpg
Indoor Hang setup-5.jpg
Indoor Hang setup-3.jpg
And this is my sewing workshop corner
Indoor Hang setup-7.jpg
Bookmarks