I don’t have a photo of pull loop attached to ridgeline
Imagine a straight line drawn on paper
Straight line could be ridgeline
Or straight line could look like flat ground or horizon

Now imagine a circle drawn, just touching straight line, like a tire rolling on a road
That circle is the pull loop

Tie a prusik around both the ridgeline and around (through) the hand sized circular pull loop
I use six wraps with Zingit 2.2
Six wraps yields 12 coils

To attach prusik to end of tarp tie out, I untie the loosely tied overhand knot that held prusik loop
Then re-tie that prusik loop through end of tarp tie out. Then tighten overhand or double overhand knot

Now it’s stuck on tarp semi-permanently
That could be a problem for anyone who likes to disassemble all their lines separate from their tarp each time they pack their gear

I leave everything attached
Zingit 2.2 is low cost enough for me to have ridgelines and guylines always attached to each tarp I have

Good luck

I need to work on my communication skills
Or take clear photos and put them here
Thanks