Page 1 of 4 123 ... LastLast
Results 1 to 10 of 34
  1. #1
    slowhike's Avatar
    Join Date
    Oct 2006
    Location
    Winston-Salem, NC
    Hammock
    DIY, gathered end , w/ spreader
    Tarp
    JRB Universal
    Insulation
    DAM/ HG Incubator
    Suspension
    Webbing and rings
    Posts
    11,677
    Images
    319

    Continuous Ridge Line Thoughts

    Thinking I will try a continuous ridge line, over the top of the tarp.
    Does this look like it would work?

    1.75mm zing it or lash it, 25'

    https://apis.mail.yahoo.com/ws/v3/ma...ils=true&pid=2
    I too will something make and joy in it's making

  2. #2

    Join Date
    Jul 2020
    Location
    Durham, NC
    Hammock
    DIY GE 12’ Hexon 1.6
    Tarp
    SLD Winter Haven
    Insulation
    CDT Gemini DIY
    Suspension
    Whoopi slings
    Posts
    109
    Images
    11
    Hi from Durham! I use 25ft of zing it with Prusiks made with LashIt to attach tarp. I like the ZingIt, but my prusiks don’t always hold and will slip. I switched to using a Klemheist friction knot, and those seem to hold better. Others love Nama Claws.

    I especially like having a continuous ridge line when the weather is nice and I can stow my tarp in sleeves, enjoy the open sky, and be ready for quick deployment if rain moves in.

  3. #3
    slowhike's Avatar
    Join Date
    Oct 2006
    Location
    Winston-Salem, NC
    Hammock
    DIY, gathered end , w/ spreader
    Tarp
    JRB Universal
    Insulation
    DAM/ HG Incubator
    Suspension
    Webbing and rings
    Posts
    11,677
    Images
    319
    Thanks.
    I'll check out that Klemheist friction knot.
    I too will something make and joy in it's making

  4. #4
    Senior Member Need2noCallahan's Avatar
    Join Date
    Sep 2014
    Location
    Camdon, NC
    Hammock
    HG 10’ w/net
    Tarp
    Anything with door
    Insulation
    HQ 20*/40* UQ-TQ
    Suspension
    Tree straps to con
    Posts
    361

    Continuous Ridge Line Thoughts

    Just curious if the use of the continuous ridge line is for ease of positioning the tarp or just fun to say?🥸

    I started off years ago with one, but got tired of my prusiks getting stuck after over tightening my tarp. I once ripped off a thumb nail and come to think of it , I don’t recall the couple a few hundred yards away being to impressed with my sailor language.

    I now use a 15’ piece of line on each end of the tarp fed through one of those toggle things (see below, I think they are line locks) and the other end of line has some sort of clip. So far I have had no trouble with this setup.





    Sent from my iPhone using Tapatalk

  5. #5
    LowTech's Avatar
    Join Date
    Aug 2020
    Location
    Nomadic, US SW at moment
    Hammock
    one wind 11' wide
    Tarp
    one wind 12'
    Insulation
    SLD, UGQ, LL, JRB
    Suspension
    UCR
    Posts
    866
    Same here on the lash-it. I do another wrap if the pussiks slip and I use a pull loop to help move them when needed.

  6. #6
    Senior Member WalksIn2Trees's Avatar
    Join Date
    Apr 2013
    Location
    Albany, NY
    Hammock
    Dutch Chameleon
    Tarp
    UGQ Winterdream
    Insulation
    0° Zepp/Ren...UGQ
    Suspension
    Dutchware bb sus
    Posts
    916
    Images
    4
    Quote Originally Posted by LowTech View Post
    Same here on the lash-it. I do another wrap if the pussiks slip and I use a pull loop to help move them when needed.
    this is what I do for prussiks as well when I use them. if they slip I just asd another wrap. I haven't used the crl since I switched the straps and Beatle buckles when I got my chameleon. I just figured heck of it I've already got the straps for the chameleon I may as well get them for my tarp too. This way if one breaks I can always take one off the tarp.

    Sent from my SM-T727V using Tapatalk

  7. #7
    Senior Member
    Join Date
    Sep 2018
    Location
    old dirt
    Posts
    444
    friction hitches dyneema on dyneema should be avoided if at all possible (they work badly). prusik should be avoided in most cases, there's many other friction hitches which work better. the combination of dyneema, prusik, and excessive amounts of wraps to "make it work", along with over tensioned ridgeline or high winds result in the terrible experiences above.

    there's nothing wrong with the setup if you do it properly: if you must use dyneema for the ridgeline, at least use some normal cord for the friction hitches. firction hitches can be blake hitch or farrimond or (if you want to go rolls royce) valdotain tressee, but not prusik.

  8. #8
    Senior Member cmoulder's Avatar
    Join Date
    Nov 2017
    Location
    Ossining, NY
    Hammock
    DH Darien, SLD Tree Runner
    Tarp
    HG hex
    Insulation
    Timmermade, Revolt
    Suspension
    Kevlar, Lapp Hitch
    Posts
    4,912
    Images
    356
    I agree that the Prusik is not the best knot for all materials, definitely not for zing-it/lash-it in my experience. I've also experimented with Klemheist and Hedden, and they also presented the same issue that Prusik does; if you introduce enough wraps to make it hold, it subsequently jams pretty hard under load.

    However, I've used Prusik with some non-Dyneema cords and find it works extremely well with Lawson Glowire and Guywire, and I recently tested it with Ironwire and it works extremely well. It also works well with Atwood Tactical Cord and Micro Cord (although tiny, and poor handling and tangling), and with Kelty Triptease. But IMHO the Lawson products have the best 'Goldilocks' set of attributes for the job.

    Nanok is exactly correct that if you use Zing-it for the CRL that it is far better to use some other non-Dyneema cord for the actual Prusik.

    Lawson Ironwire with Prusik:



    First time pitched 'for real' ..... Success — didn't budge a micron all night!

    Five Basic Principles of Going Lighter (not me... the great Cam Honan of OZ)
    “If everybody is thinking alike, then somebody isn't thinking.” ~ Gen. George S Patton

  9. #9
    slowhike's Avatar
    Join Date
    Oct 2006
    Location
    Winston-Salem, NC
    Hammock
    DIY, gathered end , w/ spreader
    Tarp
    JRB Universal
    Insulation
    DAM/ HG Incubator
    Suspension
    Webbing and rings
    Posts
    11,677
    Images
    319
    Thanks for the input all.
    I have been using the Tarp Flyz shown in my first post for a long time with a line coming off each end of the tarp and the Tarp Flyz fixed on the cord close to the tarp.
    I take the line around the tree and back to the Tarp Flyz.

    It works great. I just have been using that same, two part ridge line for a lot of years and decided to replace it with a new line.

    Just thought I might experiment with a over the top continuous ridge line but I don't know if it will be any better than what I have been using.

    So many options leave me undecided at this point.
    I too will something make and joy in it's making

  10. #10
    Senior Member
    Join Date
    Jul 2019
    Location
    PNW- ONP adjacent
    Hammock
    netless mostly...
    Tarp
    DW Winter, Hex 12
    Insulation
    HG Burrow/Incu E20
    Suspension
    Whoopie-Spider
    Posts
    123
    Jeff Meyers and Autumn Ultralight both make variations of a hooked/shackled fixed end and toggled free end with rock-solid nama claws for the tarp. Perfection.

  • + New Posts
  • Page 1 of 4 123 ... LastLast

    Similar Threads

    1. Continuous ridge line
      By mountaindreamer in forum Suspension Systems, Ridgelines, & Bug Nets
      Replies: 8
      Last Post: 10-08-2020, 07:21
    2. Do I Need a Continuous Ridge Line for My DCF Tarp?
      By muzbrake in forum Suspension Systems, Ridgelines, & Bug Nets
      Replies: 17
      Last Post: 08-18-2020, 08:38
    3. UGQ Continuous Ridge Line Video
      By sr1355 in forum UGQ Outdoor Equipment
      Replies: 12
      Last Post: 01-26-2017, 15:28
    4. Continuous Ridge line question
      By jbogg in forum Suspension Systems, Ridgelines, & Bug Nets
      Replies: 12
      Last Post: 04-20-2014, 10:23
    5. Some thoughts on ridge line (RL)
      By Risk in forum Suspension Systems, Ridgelines, & Bug Nets
      Replies: 14
      Last Post: 01-02-2013, 19:04

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •