I was under the misimpression that the poles, once assembled, were of two different lengths. Now I see that the three section poles assemble into the four section poles so that, in the end, all four poles are the same length. Got it!
I was under the misimpression that the poles, once assembled, were of two different lengths. Now I see that the three section poles assemble into the four section poles so that, in the end, all four poles are the same length. Got it!
Last edited by Tonopah; 04-03-2021 at 17:55. Reason: grammer
Slightly off topic, I`m looking to make my own Tensahedron stand for use in the garden to hang my 13ft Warbonnet superfly tarp and XLC, can anyone tell me how long the poles should be? As most of the measurements online I`ve found for the poles, only seem to accommodate 11ft - 12ft hammocks so I suspect those measurements will be too short for the 13ft XLC
Last edited by Peirre O`Bollox; 04-07-2021 at 05:41.
Here is a thread on a DIY Tensa...https://www.hammockforums.net/forum/...ight=diy+tensaOriginally Posted by Peirre O`Bollox
Your pole lengths may tale a bit of experimentation.
Shug
Whooooo Buddy)))) All Secure in Sector Seven
Posting Permissions
Reply With Quote
Bookmarks