Reflect It 1.8mm splice - is it doable or should I just use a bowline knot

[Pop_Eye]

Hey Y’all

I’m about to just tie bowlines in my 1.8 mm Reflect It to have loops to larks head on my tarp. I’ve just about given up on doing a locked brummel and a bury to get a tidy loop on this cordage.

I’ve made a dozen attempts with all kinds of tools and wire gauges for fishing the bury. I just seem to destroy the fibers on an attempt to finish the bury. I even bought a #16 stitching needle locally to attempt a bury, but no splice joy.

The fixed eye, I can do without an issue.

I’ve even tried removing the reflective weave in the standing end of the bury to try and gain a bit of inner diameter to the cordage.

I’ve been able to make continuous loops, and locked brummels with 2.2mm lash it and I’ve made whoopies, dog bones and a few different kinds of soft shackles with 7/64 Amsteel.

Am I missing something?

[poor_jalopy]

I feel your pain ... I too struggled just like this. Thankfully, my son got into making different crafty projects with paracord (think origami, but with rope), and used his money to guy an assortment of loop turners. On a whim, I tried out his smallest size, and it worked like a charm with my 1.75 mm zing it.

I figure if it works with that small stuff, it should work for you. Alas, right now I can't find where he bought it from. Once I nail down exactly which type we used, I'll pass it on. However, don't lose hope ... it is possible, and there will probably be ten better answers than I can give before I can reply.

[CorwinC]

I use a strand out of a Cat5 computer cable folded over to splice braided mason twine. I've never used reflect it myself, but it should be similar.

[Pop_Eye]

I use a strand out of a Cat5 computer cable folded over to splice braided mason twine. I've never used reflect it myself, but it should be similar.

Thanks, I tried 22 gauge bare steel wire, but for some reason, the bury is giving me fits.

Perhaps it’s a skill level thing.

[LowTech]

Thanks, I tried 22 gauge bare steel wire, but for some reason, the bury is giving me fits.

Perhaps it’s a skill level thing.

Did you ever manage to make this work?
I've been trying the same thing and having the same issues. Even tried pulling the wire w/ pliers and still couldn't get it to bury.

[Rusty Shackelford]

I finally managed to get mine to splice with some thin wire, I'm currently waiting on another order from Dutch that has a couple of splicing needles in it that I'm hoping will make it easier this time round. The best advice I can give is to get a good proper taper on your bury, I believe that was my problem before, I was trying to leave the end too blunt.

[Pop_Eye]

Did you ever manage to make this work?
I've been trying the same thing and having the same issues. Even tried pulling the wire w/ pliers and still couldn't get it to bury.

I gave up and just used knots.

Best I can tell, the reflective strip appears to be snagging. I even tried removing the strip completely from the bury, but that just disturbed the fibers that it turned in to a huge cluster bury...

[Pop_Eye]

I feel your pain ... I too struggled just like this. Thankfully, my son got into making different crafty projects with paracord (think origami, but with rope), and used his money to guy an assortment of loop turners. On a whim, I tried out his smallest size, and it worked like a charm with my 1.75 mm zing it.

I figure if it works with that small stuff, it should work for you. Alas, right now I can't find where he bought it from. Once I nail down exactly which type we used, I'll pass it on. However, don't lose hope ... it is possible, and there will probably be ten better answers than I can give before I can reply.

If you can recall the tool source, I would appreciate the info!

I’ve searched loop turners, but the only ones I can find are to big for this cordage.

[Rusty Shackelford]

I ended up knotting mine after making a couple attempts at a locked brummel bury however I was able to just make a bury on the other end to tidy it up a bit. I have spliced lots of 1.75mm Zing-It but couldn't do much with the Reflect-It.

[Pop_Eye]

I ended up knotting mine after making a couple attempts at a locked brummel bury however I was able to just make a bury on the other end to tidy it up a bit. I have spliced lots of 1.75mm Zing-It but couldn't do much with the Reflect-It.

I just realized that Zing It doesn’t tangle to the degree that the Reflect It does.

I cut hanks of both last night and while coiling them up, the Zing It didn’t tangle, where the Reflect It did... a lot.

I’m going to make an assumption that the coating on the Zing It helps the bury along. Whatever the reason for the increases friction that causes Reflect It to tangle may be part of the problem I’m having.