Primaloft question

[Firesong]

I have only had the fortune of gazing upon your Premium (note the Capital for P) down gear so your opinion is highly valued by yours truly, ok forgive the gushing but..., ohh now I remember, I have never worked with synthetic insulation (down yes but it is a huge pain) but I am curious if it is possible to create an underquilt good down to about 0* DIY that would pack small enough for a pulk style outing, and suggestions or help on the design would be greatly appreciated if only a nod in the right research direction.

Hi! Are you talking 0°C? Or 0°F? I’m guessing F due to the pulk sled. For lotsa heat you could go with a dual layer Climashield quilt using two 7.5 layers or a 10.5 & 7.5 to really reach that. I’m pretty sure there is a DIY walk through in the DIY forum here. Pm if you need some more info.
J

[GilligansWorld]

Hi! Are you talking 0°C? Or 0°F? I’m guessing F due to the pulk sled. For lotsa heat you could go with a dual layer Climashield quilt using two 7.5 layers or a 10.5 & 7.5 to really reach that. I’m pretty sure there is a DIY walk through in the DIY forum here. Pm if you need some more info.
J

Was looking at going 0*F - Saw your reply so thanks and I pulled the trigger and got this stuff. I know I will need Shock Cord for the Primary and was planning on doing a secondary for the ends. What girth do you reccomend? I figure it has to be bigger than 3/32 but how big on primary?
Sythetic 0deg.jpg

[Firesong]

Was looking at going 0*F - Saw your reply so thanks and I pulled the trigger and got this stuff. I know I will need Shock Cord for the Primary and was planning on doing a secondary for the ends. What girth do you reccomend? I figure it has to be bigger than 3/32 but how big on primary?
Sythetic 0deg.jpg

It will be pretty heavy so use 1/8 on the ends for the main.