Super proud of this project but time to let someone else enjoy it... Truly a spacious palace!! Perfect condition with no tears, marks, stains or odors.
All reinforcement points and panel pulls are bonded, so no needle holes. The ridge is a standing french seam caped with 7/8" grosgrain ribbon, which creates the ridge tie out point in Warbonnet fashion. Ridge has been seam sealed on the underside, though it likely wasn't necessary.
1/4" double rolled hem around the perimeter.
Ground corners have 3/4" Beastie D's and doors have 1/2" Beastie D's. Ridge has a stainless split ring through the grosgrain loop.
Includes Jerry Brown Hollow Core Spectra split ridge lines (12-15 foot each side) with Dutch Hooks and mini ucrs attached to diamond knots tied to the split rings at the ridge.
Tarp has 2QZQ style pockets for an internal pole (not included) and a single center panel pull per side (added after photos were taken). 1/4" ribbon is sewn into the underside of the ridge to tie off the internal pole.
Doors can be setup in beak fashion, flat and overlapped or pinned back in an open position.
Ridge measures twelve feet and each side panel is 52" at the mid-point. Tarp & noseeum double ended stuff sack weigh 20oz on my scale.
This is for the tarp, noseeum double ended stuff and ridge lines as described above. Provide your own internal pole and ground lines.
$135 via PayPal shipped in the ConUs.
Will trade for a Z-Packs Nero/Zero or 50F top quilt (no CDTs please).
Offered for sale concurrently on other related forums.
Originally Posted by MDCrab
Bookmarks