newbe upgrade/modification questions

[Smb82]

I am finally getting around to upgrading my ENO DN and have added a zing-it whoopie srl and 1/8" Amsteel continuous loops. when removing the stock rope from the sewed channel i see tbat it is larksheaded then looped back through one of the loop sides. It seems that tbjs may keep the larkshead from coming undone when packing it up. I am wondering if doing this with the continuous loops would be a good/bad idea? I also plan on attaching the loops to my atlas straps (until i can get something better) with soft shackles. Would also love to hear any experienced opinions on that idea.

[Spiguyver]

I am finally getting around to upgrading my ENO DN and have added a zing-it whoopie srl and 1/8" Amsteel continuous loops. when removing the stock rope from the sewed channel i see tbat it is larksheaded then looped back through one of the loop sides. It seems that tbjs may keep the larkshead from coming undone when packing it up. I am wondering if doing this with the continuous loops would be a good/bad idea? I also plan on attaching the loops to my atlas straps (until i can get something better) with soft shackles. Would also love to hear any experienced opinions on that idea.

A simple larks head is enough. That's what you'll find on most hammocks, and I believe all of the cottage vendors hammocks.

[oldgringo]

Once you load the hammock, the larksheads will "set", and will stay put unless deliberately disturbed.

[1-Hung-Low]

If your still concerned after the above info, you can always connect the two CL's together with a non climbing biner.