Hammockgear tarp with 90degrees bridge hammock

[laincha]

90 degrees ul gamma hammock is recommended on the hammocktent site to be used with hammocktarp from zpacks.
Can anyone tell me why I can't use the hammock gear tarp with doors?

They tell me it's not advisable but I don't understand why:
Practically the same measurements.

Any ideas?
Thanks, from a newbie

[raggydoo]

Hammocktent offers a tarp made for them by Zpacks, which has dimensions that are different from most tarps made for gathered end hammocks.

[Intimidator]

Basically, their tarp is much wider (11.5 feet) and only has a 7 foot ridgeline, whereas the HG cuben has an 11 ft. ridgeline and is only 8.5 ft wide.

[OlTrailDog]

If you search the other 90* hammock threads you will see that folks have come up with a number of options for a tarp including the custom zpacks hammocktent tarp.

[OlTrailDog]

When I first opened this post I was thinking that someone invented a new hammock, i.e. a 90* that was a bridge hammock. Bridge hammocks use spreader bars to try and get less squeeze. The hammocktent achieves far less squeeze than a bridge hammock by the design. My first hammock was a bridge WBRR and I found the hammocktent to be far more comfortable.

[laincha]

If you search the other 90* hammock threads you will see that folks have come up with a number of options for a tarp including the custom zpacks hammocktent tarp.

thanks, I will.
At this point I'm thinking diy along the measurements I've been given in silnylon: made try cuben later. It costs the equivalent of almost 500 dollars here in cuben...