Well after building my first tarp from RSBTR'S 1.1 silpoly winter tarp kit (https://www.hammockforums.net/forum/...d.php?t=135619), using some design ideas from Kitsacowboy's thread (https://www.hammockforums.net/forum/...d.php?t=131854), I decided to add a pole mod.
This being my first tarp I'm using it as the test subject for multiple ideas. I had added grossgrain loops to the ridgeline with some leaking issues. After applying a coat of silicone mixed with mineral spirits I think I've fixed that. I want to try the loops again and see if I can fix this issue without seam sealing.
A quick online trip to Quest Outfitters, and $57.58 +10.95 shipping, and I had 16 x18" .344 male poles , 2 x 18" female poles and four tips.
When the poles arrived I found I only needed 6 male and 1 female pole per side. I had to cut an additional 6" off the last piece to make a 120" pole. I just used a plumbing tube cutter for the task.
This left me 4 extra 18" poles. ..hmmmm...
I didn't have enough shock cord so I siliconed the tips into the last poles and assembled them loose.
The poles are fed through the grossgrain loops and into the 1/2 Beasty D's on either pull out. Fit is taught but not super tight.
With this setup there is a vastly noticeable increase in space. Plus a tighter pitch. Also, as an extra bonus, porch mode requires no poles and is as simple as unhooking the guy lines from the pegs
Bob
Bookmarks