I'm working on my first hex tarp. Fabric is RipStopbytheRoll 1.1 oz Silpoly - Mil Woodland Camo (with ripstop grid).
The four diagonal (cut on the bias) sides have a lot of stretch in them. Not too surprising, since it's a 45 degree angle (bias) to the grid pattern.
I see hex tarp kits out there with the same material that just have a rolled hem on all sides.
I'd rather not, but I'm considering sewing 1/2" grosgrain on the diagonal sides (at least).
What's the best solution?
hextarp.jpg
Bookmarks