Thought I'd have a play with adding some clew suspension to the existing primary/secondary suspension on my Big Purple.
First I made a kinda "demi-clew", using Austrian blind rings (0.23g each),
attached to a length of pink dyneema with brummels.
This I fixed onto to the primary suspension lines using mini cordlocks.
Then made nettles of 1.5mm black shockcord shoelaced through the rings on the demi-clew and down to garter clips,
attached to the UQ ends, tensioning each end with a cordlock.
At the other end I tried using the blind rings threaded onto the end-cinch shockcord, but otherwise the same,
Then I tried replacing the cordlock on the primary suspension,
with another ring,
so that the demi-clew could extend all the way to the end of the hammock,
thus getting the spreading effect of attaching to the primary suspension, but not pulling on it.
Bookmarks