MASS DROP UGQ CAMO TARPS SEPT 28. 2016

[bluzharp]

Just ordered a 12' Woodland MARPAT Winter Dream! Just couldn't pass this up!


Sent from my iPhone using Tapatalk

[sr1355]

How hard and what does one have to use to seem seal these tarps?

Not mandatory on the ridge but the panel pulls should be sealed prior to use.

1) Lay tarp out on a flat surface upside down so underside of seam/panel pulls is visible

2) Apply a small bead of sealer to seam/panel pulls suitable for silicone treated materials such as Silnet Silicone Seam Sealer by McNett Be sure to use an appropriate sealer for best results.

3) Draw a 1" foam brush along seam/panel pull to "PUSH" sealer into seam/stitching on panel pull.

4) Allow to cure 24 hrs OR sealer manufacturer recommendations, the longer the better.

5) Apply light coat of baby powder or cornstarch to the sealer to prevent it sticking to itself

6) ENJOY!!!!

[sr1355]

Hum. What size of this tarp would you Warbonnet Ridgerunner owners getting?

If you want the doors to fully close the WD13, if you don't mind the doors not being able to fully close around the suspension the WD12.

[sr1355]

We're in! Order placed. Marpat - 13' Winter Dream It should serve the RidgeRunner well.
Since these have the four panel pulls, they are already seam-sealed, right?

No sealing included, we flat out do not have space to seal and cure 40-50 tarps. Easy to do just see my comment above.

[sr1355]

Almost half gone, I do not think this drop will run the full duration. If you want one jump on it before they are gone.

[bluzharp]

If you want the doors to fully close the WD13, if you don't mind the doors not being able to fully close around the suspension the WD12.

Whoa! Are you talking about a bridge suspension?


Sent from my iPhone using Tapatalk

[sr1355]

Whoa! Are you talking about a bridge suspension?


Sent from my iPhone using Tapatalk

Yes sorry, missing quote has been added in reference to the WBRR.

[Tom18C]

Just ordered the MARPAT hanger 12, nice job UGO.... Can I order the pole mod as a stand alone order from the company? Seam sealing?

[TrailSlug]

Not mandatory on the ridge but the panel pulls should be sealed prior to use.

1) Lay tarp out on a flat surface upside down so underside of seam/panel pulls is visible

2) Apply a small bead of sealer to seam/panel pulls suitable for silicone treated materials such as Silnet Silicone Seam Sealer by McNett Be sure to use an appropriate sealer for best results.

3) Draw a 1" foam brush along seam/panel pull to "PUSH" sealer into seam/stitching on panel pull.

4) Allow to cure 24 hrs OR sealer manufacturer recommendations, the longer the better.

5) Apply light coat of baby powder or cornstarch to the sealer to prevent it sticking to itself

6) ENJOY!!!!

Thanks Paul.

[sr1355]

Just ordered the MARPAT hanger 12, nice job UGO.... Can I order the pole mod as a stand alone order from the company? Seam sealing?

Since all shipping labels are provided by Massdrop we can not do any add ons. We have to use their labels as proof of mailing when the shipper scans the package. Part of being able to offer these deep discounts is limiting options to streamline production, tracking each tarp and it's options would negate the purpose of production manufacturing. We also do not have the space to offer seam sealing on 40-50 tarps, it's super easy to do yourself and I posted instructions above in an earlier post.