WBRR owners

**Passinthru** · 01-27-2015, 18:51

Originally Posted by dstenberg1

Passinthru and Nighthauk, what length doggones are you using for the head and foot ends?

I made mine to equal the length of the spreader bars so the head end is longer than the foot end. The shorter the doggones, the more compression forces on the spreader bars but if left at a reasonable length it should not be a problem. Also, a shorter triangle would effect 'tippyness' somewhat but mine is not enough to notice.

**drifter** · 01-27-2015, 20:37

Thanks for all the input everyone, ya'll have probably answered all the questions I would have had when I get one.

**fjones15** · 01-27-2015, 21:42

My hea DCC

**fjones15** · 01-27-2015, 21:45

Sorry about that. I made my head 36iners and the foots 24in.
Fred

**dstenberg1** · 02-03-2015, 14:54

Thanks for the replies about dog bone length!

**WVwanderer** · 02-04-2015, 22:25

Originally Posted by drifter

What is the distance between the buckles when setup. I’m doing a little research to see if it will work with the single line suspension setup I have now or will I need to make another one for it.

I shortened mine to 12' between the apex triangles (not the webbing strap cinch buckles). I just fits under my 12' RL tarp.

**novascotia-hanger** · 02-05-2015, 05:31

Can someone post pics of the triangle mods?

**Passinthru** · 02-05-2015, 20:59

Not much to show. The first pic is the shortened 'V' with the original 'V' clipped in place to show the difference in length. Hooked to Warbonnet type cinch buckles. The second pic shows the Dutch biners with Ti Cinch buckles. The Dutch biner replaces the small triangle shaped original hardware.