Just cut to length some arrows to make spreader bars for the net and toggleshttp://img.tapatalk.com/d/14/02/20/ybupurah.jpg
Printable View
Just cut to length some arrows to make spreader bars for the net and toggleshttp://img.tapatalk.com/d/14/02/20/ybupurah.jpg
Any suggestions on how to cover/seal the ends ?
I'm thinking the thin walls are sharp, and might prevent the ends from getting damaged or causing damage. I was thinking of plugging the ends with a small bit of foam and dipping the ends in a two part epoxy.
The pipe cutter left a knife edge on the cut that was quite sharp. I sanded the edges down and it is much better.
Of some note to those concerned with weight the tarp hammock stuff sack with the suspension swamped out with whoopie s weights 3.6 lbs. This is acceptable to me considering the comfort of the hammock
This was one of my first hammocks and I haven't set it up in months. All this talk is making me think I should set it up again :)