Test fit - HG Incubator 0F on WB Eldorado

If anyone is bored out of their mind, and would like to be bored out their gourd, I made a couple of videos for a test fit in my basement hammock lab with my Hammock Gear 0F Incubator on my Warbonnet Eldorado. Just trying to get the under quilt setup fairly good before I take it out in the wild. I tried it in the backyard over the weekend and think I had the ends cinched up too tight, so brought it inside and readjusted everything. Seems to be about right now, but I would certainly welcome any feedback.

It's almost as exciting as watching alcohol stoves boil water (which I love).

Head End:

https://youtu.be/NAUdtcF7jnA

Foot End:

https://youtu.be/10MMksmEiHA

I would give the primary suspension a good yank. Then make sure it's still centered where you want it with the secondary. Foot end could possibly be cinched a little tighter, looks like the might be a gap. I would check that after the first 2 suggestions.




Watching water boil is definitely more exciting:lol:

Thanks. I need to wrap the primary suspension around the foot end whipping I think; maybe just one loop would do. The tighter primary suspension on the foot end might just do it.

I have messed around with the foot end cinch, and keep thinking I'm clinching it too tight. A backyard test hang last week at about 20F left me with a cold butt. That foot cinch is vexing me.

Water boiling is WAY more exciting than this. :cool:

Let that primary lift the empty hammock more than you would think.
Also migrate your down to where needed.
You foot end cinch seemed pretty good.
Shug

https://youtu.be/U1D3s-oijAY

https://youtu.be/07rYfwaOyDQ

Thanks Shug. I think wrapping that primary suspension around the whipping a turn (maybe two) should probably do it. I think my backyard test supports that too.

Thanks for your great videos too, you probably have 20 more views over the last few weeks on the Adjusting a Hammock Gear Incubator :).

Thanks goobie and Shug for weighing in on my little OCD stuff. :cool:

I tightened up the primary suspension on the foot end; wrapped it around the foot end whipping x2 seemed to do it, I also did a little asymmetrical tightening/loosening of the foot end secondary suspension to help it form fit a little better. Also a couple small tugs on the foot end cinch. I didn't think it would be exciting enough to record a new video. If anyone really wants one though, I would be happy to.