Results 1 to 8 of 8
  1. #1

    Join Date
    Jul 2015
    Location
    Pittsburgh, PA
    Hammock
    DIY ROBIC
    Tarp
    OES MacCat SilPoly
    Insulation
    down bag, Klymit
    Suspension
    Kevlar+Str.Anchors
    Posts
    741

    Time for a new hammock (ROBIC XL finally busted). Next fabric?

    Well, I made it 6 years with a ROBIC XL (1.0 oz) DIY hammock, and it finally busted on me this past weekend. I sat up to put my phone away and POP! Fortunately 1) my butt was only a few inches above the not-too-hard ground, and 2) I had a spare hammock with me, an old Treehugger (ENO precursor or clone, not sure which).

    I was very foolish, however: while showing off my setup to my curious camping companion just that evening, I said (semi-bragged) that my hammock's fabric was so ultralight that it had been discontinued. Oops.

    Jack_and_hammock.jpg
    Jack the dog had to get involved in the photo shoot.

    busted.jpg

    So, what fabric should I get to construct a new one? At first glance, MTN XL 1.2 seems the best choice?

    Some stats and facts that I'll consider when choosing:
    - I'm 5'9", 130-135lbs.
    - I appreciated the feel of this hammock and didn't think it stretched too much. Though come to think of it...I'd noticed some calf ridge just recently, so maybe it was stretching more?
    - This one was 10' long and 60" wide, which I like. I use the full width, and often hang between closely spaced trees so appreciate being able to squeeze in.
    - This one weighed 282g/9.95oz including bugnet, ridgeline, continuous loops and stuffsack. Just the hammock with nothing but a Knotty mod weighed 189g/6.66oz. (gee maybe that was bad ). I bikepack with it sometimes and want light weight but obviously don't want to go stupid-light again!

  2. #2
    Phantom Grappler's Avatar
    Join Date
    Mar 2014
    Location
    Denton NC
    Hammock
    WildernessLogics 12x6
    Tarp
    HG cuben 13ridge12
    Insulation
    TopQuiltUnderQuilt
    Suspension
    S and D
    Posts
    4,955
    I like Hexon wide 1.6 You might instead get Hexon wide in a lighter version? 1.2?
    Look at dutchwaregear.com
    And look at https://ripstopbytheroll.com

  3. #3
    Senior Member
    Join Date
    Jun 2015
    Location
    MN
    Posts
    2,455
    Not the best looking bottom-entry hammock for sure!

  4. #4

    Join Date
    Jul 2015
    Location
    Pittsburgh, PA
    Hammock
    DIY ROBIC
    Tarp
    OES MacCat SilPoly
    Insulation
    down bag, Klymit
    Suspension
    Kevlar+Str.Anchors
    Posts
    741
    Nope. The threads at the rip are SO sticky!

  5. #5
    Senior Member sidneyhornblower's Avatar
    Join Date
    Jul 2014
    Location
    outside
    Posts
    1,501
    Quote Originally Posted by KBr00ks View Post
    Well, I made it 6 years with a ROBIC XL (1.0 oz) DIY hammock, and it finally busted on me this past weekend.
    -----------snip----------
    So, what fabric should I get to construct a new one? At first glance, MTN XL 1.2 seems the best choice?
    Here's one vote for the MTN 1.2. (I'm about your height but 15 pounds heavier) Mine dates from 2019 and is my main hammock with hundreds of miles on it. Some photos of it when it was first made can be found here:

    https://www.instagram.com/p/B5yNKbVlXMT/?img_index=1
    "...the height of hammock snobbery!"

  6. #6

    Join Date
    Jul 2015
    Location
    Pittsburgh, PA
    Hammock
    DIY ROBIC
    Tarp
    OES MacCat SilPoly
    Insulation
    down bag, Klymit
    Suspension
    Kevlar+Str.Anchors
    Posts
    741
    It's interesting, @sidneyhornblower, your dimensions remind me that I had thought my hammock was wider than 60", like 63-64" or so. I remember I did not trim any off the fabric edges and just hemmed it. Maybe stretching/forming has changed that? When measuring yesterday, I measured the width at the channels -- ended up 59". Seeing that the gathered end was still somewhat gathered, I also measured about 1/3 of the way down. Trying to hold it with both hands wide and see the measurement at the same time was tough.

  7. #7

    Join Date
    Jul 2015
    Location
    Pittsburgh, PA
    Hammock
    DIY ROBIC
    Tarp
    OES MacCat SilPoly
    Insulation
    down bag, Klymit
    Suspension
    Kevlar+Str.Anchors
    Posts
    741
    Just checking out the Cloud options from Dutch, and previous threads on that fabric here -- Cloud 71 sounds intriguing but stupid-light, while Cloud 1.4 is a possible option. Time for more samples...

  8. #8
    New Member
    Join Date
    May 2017
    Location
    Jay, FL
    Hammock
    DIY 1.9 oz. Ripstop Nylon
    Suspension
    Whoopie Slings
    Posts
    12
    What did you end up going with?

  • + New Posts
  • Similar Threads

    1. Time to upgrade from Robic 1.0?
      By naticen in forum Camping Hammocks
      Replies: 5
      Last Post: 10-31-2022, 14:00
    2. robic vader blue fabric
      By soul embrace in forum General Hammock Talk
      Replies: 11
      Last Post: 08-28-2018, 16:01
    3. Robic fabric width?
      By virorum in forum Ripstop By The Roll
      Replies: 3
      Last Post: 05-13-2018, 14:14
    4. TC Hammock travels 5000 miles, busted by Security
      By Ratdog in forum General Hammock Talk
      Replies: 1
      Last Post: 08-03-2013, 00:05
    5. Busted Hammock
      By slowhike in forum General Hammock Talk
      Replies: 19
      Last Post: 06-05-2012, 12:23

    Tags for this Thread

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •