where does spreader bar tip go with webbing and corner knot attachment

[bigsig11010]

On my diy big bridge I have the 1/2 inch tubular webbing with a loop crossbar tacked at the ends. I followed the grizzbridge rino instructions. I have the corner diamond knot loops and the adjustable loop triangle suspension made of 1/8th amsteel. I went back a couple of times and watched videos 3 and 4 in the gb rino series and I dont see where to insert the tips of the spreader bars. I have the .75 spreader bars with tips from dutch. Does the tip go into the webbing loop? the diamond knot loop? or the adjustable loop on the end of the triangle?? I didnt see anything else hardware wise involved in the instructions.

[bigsig11010]

I think I found my answer on grizzbridge unleashed. it looks like the tip goes into the diamond knot loop in that configuration. If I missed something someone please set me straight. For anyone else who may have the same question grizz shows it step by step on the bengal bridge set up video.

Thanks Grizz. pics to come soon of the bigbridge in canvas inspired in part by your rendition of the potter straight spine contraption hammock.