Tying continuous loop to tree strap .... knot ?

[jcdflint]

I want to make a no sew tree strap using a amsteel 10 inch continuous loop tied on for loop. What knot ?????

[Bubba]

Is the amsteel loop on the hammock and you want to connect the tree strap to the amsteel loop? If that's the case, a slippery sheet bend works where the strap is the working end. It requires a little dressing but I've used it before.

[SilvrSurfr]

Continuous loop is usually larksheaded on to the tree strap.

[Dcolon13]

My "no sew" option was to buy a ratcheting strap set at home depot ($12), remove the metal hook with some bolt cutters, and use a sheet bend (beckett hitch) to tie it to the amsteel CL. Super easy and I still use it on my indoor hammock.

[Zilla]

Continuous loop is usually larksheaded on to the tree strap.

IMO, This makes the most sense, it's the way i would do it!

[tightwad]

Why not use a marlin spike hitch and toggle?

[TominMN]

I want to make a no sew tree strap using a amsteel 10 inch continuous loop tied on for loop. What knot ?????

A loop at the end of the webbing could be done with a figure 8. If you need a CL at the end, it could be captive on the figure 8 or larksheaded to it. Not sure what sort of configuration you're trying to achieve(?)