Here is a BIG tarp in Intruder MultiCAM.
WINTER DREAM 13' Ridge Line
128Wx156RLx184 at ground
Roughly 300SF of tarp surface
4 Panel Pulls (Optional)
End Pole Mod (Optional)
End Poles (Optional)
Snap Doors (Standard)
2.0#
One half of the tarp on a 16'4" cutting table, took every inch...
CUSTOM BISHOP BAG IN MultiCAM
2.0# IN THE STUFF SACK FOR THIS MONSTER!!!
DOORS CLOSED NO END POLES - THERE IS A RIDGE RUNNER IN THERE SOMEWHERE...
DOORS OPEN AND END POLES INSTALLED
A LOOK INSIDE - PLENTY OF ROOM FOR THE RIDGE RUNNER
PORCH MODE WITH END POLES
PORCH MODE WITH TREKKING POLES
PANEL PULL
TYPICAL STANDARD GUYOUT
Bookmarks